S Sure Dry Restoration

Water Damage Restoration

Mold Remediation in Phoenix, AZ

Targeted mold removal and moisture control for Phoenix properties hit by leaks, AC issues, or desert humidity swings.

  • ✓Mon–Fri 8am–6pm
  • ✓Sat 9am–2pm
  • ✓Based in Phoenix, AZ

Phoenix summers push indoor humidity through overworked air conditioners, especially in 1960s-1980s homes common in Maryvale and South Mountain. Condensation forms on ducts and in wall cavities when units short-cycle, feeding hidden colonies that standard visual checks miss. We map moisture with thermal imaging and pull affected drywall or insulation before spores spread into living spaces.

Monsoon storms dump heavy rain on flat-roof homes in Camelback East and Arcadia, sending water under stucco and into stucco-clad walls. Once trapped, gypsum board and wood framing hold moisture for weeks in the extreme heat, creating ideal conditions for rapid mold growth. Containment barriers and negative air machines keep spores from migrating into unaffected rooms during removal.

Maricopa County code requires proper disposal of contaminated materials and documentation when mold exceeds certain thresholds. We separate and bag debris on-site, then run HEPA air scrubbing until clearance sampling shows levels below residential standards. Post-job, we document drying with moisture meters so homeowners in Tempe or Mesa can show insurers the work was completed correctly.

Technician insight

In Phoenix the thing that catches most people out with Mold Remediation is how fast AC condensation in 1970s Maryvale and South Mountain homes grows behind drywall even when the air feels bone-dry outside. Homeowners often paint over spots and run fans, but the slab and stucco trap the moisture until monsoon season makes it worse.

Hidden mold behind stucco in Arcadia after monsoon leak

Water from a roof edge leak traveled under stucco and into insulation on a 1980s home. We opened two wall sections, found active growth on the paper facing, contained the rooms, removed the wet materials, and ran negative air for three days. Clearance samples passed and the homeowner could schedule drywall repair without insurance delays.

Mold Remediation Services We Offer

✓AC Condensation Mold Removal

Removes mold from ducts, coils, and wall cavities caused by Phoenix summer AC short-cycling in older homes.

✓Post-Leak Wall Cavity Remediation

Opens and treats stucco and drywall cavities after roof or plumbing leaks common during monsoon season.

✓Attic Mold Treatment

Addresses mold on rafters and insulation from poor ventilation or undetected roof leaks in Biltmore and Arcadia homes.

✓Bathroom and Shower Mold Remediation

Removes recurring mold around tile, grout, and subfloors from constant humidity in South Mountain and Ahwatukee properties.

✓Commercial Space Mold Cleanup

Handles larger-scale remediation in retail and office buildings across Phoenix and nearby Scottsdale after water events.

Mold Remediation Cost in Phoenix, AZ

Service Typical Range What Affects It
Small contained area under 100 sq ft $650–$1,200 Single wall or ceiling section after minor leak.
Medium remediation 100–300 sq ft $1,400–$2,800 Multiple rooms or attic space in typical Phoenix home.
Hidden cavity work $300–$700 add-on Opening and treating stucco or drywall cavities.
Clearance air sampling $250–$450 Post-job testing for insurance or real estate needs.

Ranges are typical for Phoenix, AZ and confirmed with an exact written quote before any work starts.

How it works

  1. 1

    Inspection And Moisture Mapping

    We inspect affected areas with moisture meters and thermal cameras to locate hidden water in walls and ceilings.

  2. 2

    Containment Setup

    Plastic barriers and negative air machines isolate the work zone so spores do not spread to clean areas.

  3. 3

    Removal And Cleaning

    We cut out saturated materials, HEPA vacuum surfaces, and apply EPA-registered antimicrobials to remaining structure.

  4. 4

    Drying And Clearance

    Air movers and dehumidifiers dry the space, followed by post-remediation sampling before reconstruction begins.

Pricing

Pricing depends on the size of the affected area, whether hidden cavities are involved, and how many rooms require containment.

Sure Dry Restoration — Water Damage Restoration in Phoenix

Good to know

Mold Remediation — FAQs

Still have questions? We're happy to talk it through.

(623) 656-5645
+ How quickly does mold grow after a leak in Phoenix?
In summer heat, visible growth can appear within 48 hours when moisture stays trapped behind stucco or in AC ducts.
+ Do I need to leave during mold remediation?
For small contained jobs you can usually stay. Larger jobs with multiple rooms under containment may require temporary relocation for a day or two.
+ Will insurance cover mold remediation after a roof leak?
Most policies cover sudden water damage and resulting mold when addressed promptly, but secondary mold from long-term leaks is often excluded.
+ What areas do you serve for mold work?
We handle jobs in Arcadia, Biltmore, Ahwatukee, Camelback East, Maryvale, South Mountain, and nearby Scottsdale, Tempe, and Mesa.

Need Water Damage Restoration in Phoenix, AZ?

Talk to a local water damage restoration company serving Phoenix and nearby neighborhoods. Upfront quotes and workmanship you can inspect on every water damage restoration in Maricopa County neighborhoods like Arcadia, Biltmore, Ahwatukee, Camelback East, Maryvale, and South Mountain, where hot desert summers and older housing stock near Camelback Mountain or Papago Park often require fast response to prevent further issues.

Business hours

Mon–Fri 8am–6pm, Sat 9am–2pm

Phoenix, AZ

Call now Get a quote